D-Link Covr-3902 User Manual Whole Home Wi-Fi System
D-Link Covr-3902 User Manual – Almost all systems of Wi-Fi we reviewed consist of two or three elegant design components that work in a configuration of router and satellite to bring Wi-Fi to farthest from your home corners, but the D-Link Covr AC3900 Whole system of Wi-Fi home ($ 299) has a slightly different focus. It combines a traditional router with a range extender and uses mesh technology and intelligent bandwidth management to provide a roaming without interruptions in your home. Supports streaming of Mu and it is expandable, and can be managed through a web console or mobile application, but you will need to use the web GUI to access most of the configurations, since the mobile application currently offers very limited functionality. The Covr has good performance, but it can not match the overall Wireless Linksys Velop more aesthetic system performance.
One of the biggest differences between the Covr system and other wireless systems as Deco M5 of TP-Link, Google Wi-Fi and Wi-Fi smart whole Amped Wireless Ally Plus House system has to do with aesthetics. While the systems mentioned above use components that are designed with good taste and which are intended to be opened, the Covr uses a traditional router and a smaller Extender node that is matched with the router in the factory. Together provide up to 6,000 square feet of wireless coverage. Additional Extenders (up to two more) that add 1,500 square feet of coverage each will be available by year’s end.
D-Link Covr-3902 User Manual – The router is similar to the router wireless D-Link AC1900 Mu (DIR-878); It has a black casing that measures 2.1 by 11 by 8.1 inches (HWD) and usa four removable adjustable antennas. The top of the router has five LED indicators for power, internet, USB activity and activity of 2.4 GHz and 5 GHz. On the back there are four gigabit LAN ports, a WAN port, power, reset, WPS and wireless buttons, and a power connector. There is a single USB 3.0 port located at the front edge of the router that can be used to connect a portable hard drive so that you can share files over the network. Low profile Extender node is also black and measuring 1.2 by 5.2 by 5.2 inches. It has five LEDs at the top for the activity of energy, uplink and downlink for both radio bands. There is a button pair on the left side, and on the back there are buttons for power, reset and Wi-Fi, two gigabit LAN ports and a power connector.
D-Link Covr-3902 User Manual – Router 4 x 4 is a device of dual band AC2600 which can reach maximum speeds of 800Mbps in the 2.4 GHz band and 1. 733Mbps in the 5 GHz band. It is compatible with the MU streaming, which sends data to supported clients simultaneously rather than sequentially, and uses the intelligent bandwidth management to automatically choose the best band of radio for optimum performance. However, you can not separate the two bands. The continuous roaming is performed using a mesh technology that enables the router and Extender share the same SSID. The Extender node has two internal antennas and is an AC1300 device capable of speeds of up to 400Mbps in the 2.4 GHz band and 867Mbps in the 5 GHz band.
D-Link Covr-3902 User Manual – While the majority of Wi-Fi systems offer a mobile application that allows you to control access to the Internet, create schedules and enable parental controls, the Covr (iOS and Android) application is limited. You can use it to install the system and enable the MU and WPS abilities and to manually configure DHCP, IPv4 and IPv6 multicast settings, but that is all, at least for now (D-Link was working on an updated mobile application in the) time of this review). To take advantage of the filter, prioritization, programming and advanced configuration of the Covr website, you need to use the web console, which is the same console that is used to control other D-Link routers, including the Ultra wireless router AC5300 (DIR – 895L / R) and router Wi-Fi AC1900 Mu (DIR-878). It opens in a network map which shows information and alerts customers when there are network problems.
The Setup menu contains a set-up wizard & tabs to configure Internet (DHCP and DNS settings), wireless (SSIS, password, security mode, MU), guest networks, and shared USB. In the features menu you can configure the settings on QoS, Firewall, port forwarding, filtering of web sites and fast VPN. Use management screen to view the system logs, create access programs, upgrade the firmware of the router and view network usage reports.